¶ POPULAR LINKS
BUY IT! Purchase Traffic Control from BigDaddyScripts.com¶ INSTALLATION
Open the downloaded ZIP product file and drop the folder in it somewhere in your resources folder. Add your product key (get it here) to the settings.ini file and add start BigDaddy-TrafficControl to your server.cfg.
DO NOT RENAME THE FOLDER.
If you change the name of the folder it will not function correctly so leave the name as it is.
¶ CONFIGURATION
| SETTING | DEFAULT | DESCRIPTION |
|---|---|---|
| [licensing] | ||
| key1 | none | This is where you put your product key |
| [settings] | ||
| SpeedZoneRadius | 50 | the radius of the speed zone around each flare - in GTA units (about a meter) |
| SpeedZoneSpeed | 15 | the speed of the speed zone around each flare - in MPH |
| continuousCones | true | if you want to have a cone respawn into your hand immediately after you set one down without having to do the /cone command again |
| useAcePermissions | false | if you want to lock the flare command to a permission to limit use, set this to true |
| permissionToUse | command | set this to the ace permission that you want to allow flare use (if above is true) |
| [keys] | you can set these to either the control id or a key in ValidKeys.txt. | |
| setObject | 46 | key used to place/set an object |
| delObject | 323 | key used to delete/pickup an object near you |
| putAwayObject | 178 | key used to take an object out of your hands |
¶ COMMANDS
/traffic opens the menu
/flare will put the flare in your hand and [E] sets it on the ground and [X] takes it out of your hand and stops placing them
/cone will put the cone in your hand and [E] sets it on the ground and [X] takes it out of your hand and stops placing them
/pylon will put the pylon in your hand and [E] sets it on the ground and [X] takes it out of your hand and stops placing them
/barrel will put the traffic barrel in your hands and [E] sets it on the ground and [X] takes it out of your hands and stops placing them
/flagger will put the flagman sign in your hand. Pressing [E] flips it between STOP and SLOW. Traffic will obey. Pressing [X] temporarily lifts the effect on the traffic and pressing [E] again will reinstate it. [DEL] removes the sign from your hand and stops the flagman effect on traffic.
| MENU OPTION | DESCRIPTION |
|---|---|
| Flares | Set Traffic Flares |
| Cones | Set Traffic Cones |
| Pylons | Set Traffic Pylons |
| Barrels | Set Traffic Barrels |
| Barriers | Set Traffic Barriers |
| Flagman | Toggle Flagman on/off |
| Nodes | Toggle Node Editor on/off |
| Clear | Mass Clear Near You |
¶ HOW TO PLAY
For Flares, Cones, Pylons, Barrels, Barriers... Toggle them on (either using the command or menu) and use [E] (deafault) to set one down. If configured for continuesCones then another will pop into your hands. You can press [X] (default) to stop setting them and remove the one from your hands. To remove them walk up to one and press [DEL] (default) and flares & barriers will just disappear but the others will pop back into your hands again (to RP putting it away). Press [X] to remove it from your hands.
Node Editor
When you toggle the node editor on you see a visual representation of the traffic nodes setup within the game. You can walk up to any green node and toggle it to red (using the set key, [E] by default). This turns it "off" and tells traffic to not drive there if possible. You have to be strategic in how you do it and experiment a little because it does not behave like you think it might. The nodes tend to toggle in groups. Be sure to turn them back to their original state when done or they just stay that way.
Mass Clear
The clear option will try to clear any flare, code, pylon, barrel, barrier within a radius of you. Sometimes it can, sometimes it can't. Usually if it leaves some behind they will despawn when you walk away after trying to clear them.
SERVER RESTART.
A server restart will clear all objects and reset traffic nodes to their original state